제품정보 > 특수사업부 > 보트소재
보트소재

기술의 개요

[ 보트 소재의 특징 ]

보트지 원단으로 사용되고 있으며, 강렬한 열과 빛에 강하다.

방수 기능과 변색이 없는것이 특징이다.

제품의 분류

보트소재

KH 310 CSM

Base fabric : Aramide

Coating : Ext : Chlorosulfonated Polyethylene (CSM)

Int : Polychloroprene (CR)

Specifications Unit Direction Standard-Test Spec
Thickness mm - KS K 0506:2006 1.0(±10%)
Weight g/㎡ - KS K 0514:2006 1,300(±10%)
Tensile Strength N/5cm Warp KS K 0521:2006,
C.R.E STRIP METHOD		 12,000 ↑
Weft 8,000 ↑
Resistance to Weather N/5cm Warp KS K ISO 105 B04:
2007		 11,000 ↑
Weft 7,000 ↑
Tear Strength N Warp KS K 0536:2009,
C.R.E TONGUE METHOD		 550 ↑
Weft 700 ↑
Tensile Strength in Welding Part N/5cm - KS K 0530:2007,
C.R.E		 8,000 ↑
Abrasion Resistance Weight Loss,mg - KS K 0818:2006,
Taber Method		 500 ↓
Colorfastness to Weather Grade - KS K ISO 105 B04:
2007		 4 ↑
Temperature Cycle Appearance - Ministry of Land,
Transport and Maritime
Affairs 2004-77		 NO CHANGE
Puncture Resistance N - KS K 0744:2007,
C.R.E		 2,000 ↑
Remark

NH 210 CSM

Base fabric : N66 - 1680D

Coating : Ext : Chlorosulfonated Polyethylene (CSM)

Int : Polychloroprene (CR)

Specifications Unit Direction Standard-Test Spec
Thickness mm - KS K 0506:2006 1.1 ↑
Weight g/㎡ - KS K 0514:2006 1,500 ↑
Tensile Strength N/5cm Warp KS K 0521:2006,
C.R.E STRIP METHOD		 4,900 ↑
Weft 4,900 ↑
Resistance to Weather N/5cm Warp KS K ISO 105 B04:
2007		 3,920 ↑
Weft 3,920 ↑
Tear Strength N Warp KS K 0536:2009,
C.R.E TONGUE METHOD		 392 ↑
Weft 460 ↑
Tensile Strength in Welding Part N/5cm - KS K 0530:2007,
C.R.E		 3,920 ↑
Abrasion Resistance Weight Loss,mg - KS K 0818:2006,
Taber Method		 500 ↓
Colorfastness to Weather Grade - KS K ISO 105 B04:
2007		 4 ↑
Temperature Cycle Appearance - Ministry of Land,
Transport and Maritime
Affairs 2004-77		 NO CHANGE
Remark Standard width : 57in - 145cm
이용약관 | 개인정보취급방침 | 이메일 무단 수집거부
COPYRIGHT (C) FINE INC. ALL RIGHTS RESERVED

X